The base to the ceiling

The ready: Electric drill, screwdriver, Viti Edadi, thread cutting tools, wire connectors, measuring tools, scale, twist, safety glasses and gloves, downtime and safety measures before installing any Always turn off the power in the room before using electrical appliances. This is the first step to ensuring your safety. Also be sure to use appropriate personal protective equipment such as safety glasses and gloves to avoid accidental injury. Measure and Mark Location Before installing a ceiling light, you need to carefully measure the ceiling to ensure that the ceiling light is installed in the correct location. Use a measuring tool to measure the center point of the ceiling and mark it with a pencil.

This mark will become the center point of the ceiling light installation. Installation Process Ceiling Base Installation Ceiling lights usually come with a base that needs to be installed on the ceiling. Use a this Belize Mobile Number List change drill and screws to secure  to make it stable. The mounting position of the base must be aligned with the previously marked center point. Connecting Cables Make sure the power is turned off before connecting the wires. Then use a wire cutter tool to remove the insulation from the wire to expose the wire. Connect the ceiling light wires to the room wires Make sure you connect the appropriate wires correctly.




Live to live neutral to neutral. A ground wire must also be connected for safety. Ceiling Lamp Installation Gently insert the ceiling lamp into the base and rotate until it is securely attached to the base. Make sure the ceiling light is securely mounted and does not wobble. If necessary you can fine-tune the position of the ceiling light to ensure it is in the center of the room. Ceiling lamp Ceiling lamp single product layout Ceiling lamp item number In stock Euro Euro Ceiling lamp panel Panel Ceiling panel Panel Ceiling lamp panel In stock Euro.